| Base parameters | |
| Measuring medium | Liquid or gas (compatible with contact material) |
| Pressure range | -0.1~0~6MPa (see selection table for details) |
| Pressure mode | Absolute, gauge, negative |
| Output signal | 4～20mA,0～5VDC |
| Power supply range | 9～32VDC |
| Media temperature | -40～85℃ |
| On-time | 20ms |
| Response frequency | Analog signal output≤ 20Hz |
| Accuracy class | 0.5%FS (including repeatability≤0.035%FS, hysteresis≤0.05%FS) Reference conditions:
temperature 15~25°C, atmospheric pressure 86~106kPa, humidity 45~75%RH |
| Temperature compensation | -10～70℃ |
| Stable performance | ± 0.2% FS/year |
| Temperature drift | ±0.02%FS/°C (temperature compensated) |
| Degree of protection | IP67 Note: The above protection level refers to the electrical connection achieved after it is complete, and also depends on the electrical connection plug. |
| Durable performance | 10X10⁶ times (lower range to upper range cycles) |
| Overall weight | ≈60g |
| Maximum power | ≤0.02Us(W) Note: Us=Supply voltage |
| resolution | 0.02%FS |
| Load characteristics | |
| Voltage type | ≥10kΩ |
| Current type | Load ≤ {(Us-7.5)÷0.02}Ω(Us=Supply voltage) |
| Environmental conditions | |
| Ambient temperature | -40～85℃ |
| Ambient humidity | 0%~95%RH(no condensation, no condensation) |
| Overpressure and blasting | |
| Overload pressure | 200%FS,200%FS,200%FS,300kPa,480kPa,750kPa,800kPa,1.2MPa
2MPa,3MPa,5MPa |
| Burst pressure | 500%FS,500%FS,400%FS,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa
9MPa,12.5MPa |
| Overall material | |
| diaphragm | 316L stainless steel (contact with the medium to be measured) |
| Process connection | 304 stainless steel (contact with the medium to be measured) |
| enclosure | 304 stainless steel |
| Threaded seals | Fluorine glue (contact with the medium to be measured) |
| Connector | ABS engineering plastics |
| Cable | φ3.2 polyurethane shielded cable |
| Mechanical stability | |
| Seismic performance | 20g(20… 2000Hz) in accordance with IEC60068-2-6 standard |
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
| Electrical protection | |
| Short-circuit protection | perpetual |
| Anti-polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ 500VDC |
| Dielectric strength | 500VAC |
| Output limits | |
| 4-20mA | Output min. 4mA and output max 20mA |
| 0-5VDC | Output minimum 0.001VDC, output maximum 5VDC |
